Ergonomic keyboards developed from the ground up.
Easy to assemble kits, with detailed documentation and community support on Discord.
All dactyls parts are open-source.
What's in the box
Every kit comes with the latest version of our custom-developed hardware and high-quality components and screws.
All hardware is open-sourced and available on Github.
Flexible PCBs – custom-developed PCBs to make the build faster, easier, and more reliable.
Splinky: RP2040-based boards
Bringing the latest hardware innovation to dactyls, with huge memory and a familiar pro micro factor.
Designed by Plut0nium and updated by BKB, follows the RP2040_CE standard.
Hardware – M4 screws and inserts, that make the keyboard plates and tents easy to install and strong.
Shield PCBs – custom-developed PCBs to install the Splinky’s onto. They are screwed into the case, which removes the need for any hotglue and increases reliability.
Audio jacks – both sides of the keyboard connect with an audio cable (TRS or TRRS).
Reset button – accessible through the bottom, to flash your new firmware into the keyboard.
Anti-slip pads, to stop the keyboard from moving on the desk. The plates and tents come with inserts so they are snug and fit.
Ribbon cables – flexstrip 2.54mm cables to connect the shield PCB to the plate PCBs easily.
RGB kit (optional) – for that sweet, sweet per-key RGB. Uses SK6812 Mini-E leds to solder onto the PCBs.
3d printed parts (optional)
If you don’t have a 3d printer, you can grab all the parts you need directly from the shop.
They are printed using Prusament Galaxy Black on MK3s at 0.15mm high quality layer height.
Industry-defining quality, with everything tuned from the custom 3d model to the settings used on the printer.
This optional kit includes:
- 2 plates – right and left
- 2 cases – right and left
30 degree tent for additional ergonomics.
Detachable using 4 screws, and anti-slip pads.
This optional kit includes:
- 2 tents – right and left
- anti-slip bumpons
What you will need
Those parts are not included in the kits, and you will need to source them yourself.
Our Dactyl keyboards are compatible with MX-format switches. This includes brands like Boba, Kailh, Zealios, Cherry etc.
They are not compatible with low profile switches (Kailh Choc, MX low profile).
You will need to source your own switches, if you are not sure multiple shops offer switch testers.
Use it to connect the right side of the keyboard to the computer.
Make sure to use a high-quality usb cable, with the other side either USB-A or USB-C (eg. if you use a laptop with USB-C ports).
You will need it to connect both sides together (both TRS and TRRS work).
Our keyboards are compatible with all standard audio cables, including the fancy custom ones.
Reuse your favourite keycaps, or grab a new set (We recommend searching for “ortho” sets).
As for keycap profile, the keyboards will work with all following profiles:
DSA, XDA, SA, MT3, DES.
MT3 has been popular lately and is a favourite of ours.